| Depth 512mm (20.16“) |
|
Width 482.6mm (19“) |
|
Height 88.1mm (3.47“) |
|
SPECIFICATIONS |
|
A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling |
|
Amplifier Gain 39, 35, or 32dB (Switchable) |
|
Analog Inputs Yes |
|
CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) |
|
Channels 2 |
|
Continuous Rated Power (1 kHz, THD 1%) 2Ω 2000Watts |
|
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1450Watts |
|
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850Watts |
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200Watts |
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 600Watts |
|
Control Protocol CAN-Bus (with RCM 26 module) |
|
D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling |
|
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing |
|
Digital Inputs Optional with RCM-26 |
|
DIM 30 0.02% |
|
Electronics Type Amplifier |
|
FIR-Drive Optional with RCM-26 |
|
GPIO Control Ports 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) |
|
Impedance 2/4/8Ω |
|
Input Impedance (Balanced) 20kΩ |
|
Input Sensitivity 0 dBu / +6 dBu / +7 dBu (Selectable) |
|
Intermodulation Distortion (SMPTE) 0.05% |
|
Internal Processing 2 DSPs (150 MHz, 300 MIPS) |
|
Maximum Bridged Output 4Ω 3800Watts |
|
Maximum Bridged Output 8Ω 2900Watts |
|
Network Control (IRIS-Net) Optional with RCM-26 |
|
Power Consumption 1000 W |
|
Power Supply 100 - 240V, 50 - 60 Hz |
|
Sample Rate 48 kHz |
|
Sample Rate Conversion (SRC) 32 kHz - 192 kHz, internal Sample-Rate- Converter |
|
Signal-to-Noise Ratio (A-weighted) 109dB |
|
Slew Rate 30V/µs |
|
Topology Class-H grounded bridge |
|
Total Harmonic Distortion 0.05% |
|
SIMILAR PRODUCTS |
点击放大
