点击放大
|
产品类别:功放 |
产品名称:美国皇冠CROWN:XLS-202D 音频功率放大器 |
产品价格:面议
关 键 词:功放,舞台功放,音频功率放大器
产品说明:香港百利恒国际有限公司提供美国皇冠CROWN:XLS-202D 音频功率放大器产品信息,包括美国皇冠CROWN:XLS-202D 音频功率放大器产品详细介绍,美国皇冠CROWN:XLS-202D 音频功率放大器产品参数,3D图库等信息,显示的美国皇冠CROWN:XLS-202D 音频功率放大器图仅为参考,购买请以美国皇冠CROWN:XLS-202D 音频功率放大器实物为准.
|
美国皇冠CROWN:XLS-202D 音频功率放大器 技术参数 |
皇冠CROWN XLS-202D 音频功率放大器
XLS202包含着一系列优异特性与一流的可靠性能。每个通道上的高通滤波器由三档选择,包括(30Hz/15Hz/关闭)。用于全频音箱时,可以选择30Hz或15Hz,用来防止无用的超低频信号过载低音单元。用于超低音时,可以关闭。
采用金属封装的输出器件,虽然它比其他厂家使用的塑封输出器件贵的多,但是它的效率和可靠性很高。
采用先进的设备检测了每个器件的功率曲线和峰值功率处理能力,然后刷选和配对。
采用坚固的全钢质机壳,并配置高效强制式风扇以免过分热量聚积。
输入灵敏度 1.025V满负荷分配给4Ω负载
功率:立体声8 Ω 200W,4 Ω 300W,桥接8 Ω 600W
频率响应(从20Hz-20KHz)XLS 202: ±0.75dB
相位响应(在1W时)XLS 202: 在10Hz时,-10°在20KHz时,+19°
信噪比(20Hz-20KHz)XLS 202: >100dB(A加权,在满负荷工作时)
总谐波失真(THD)XLS 202:: <0.15%(在满负荷输出时,从20Hz-1KHz)
互调失真(IMD)(4: 1时,在60Hz和7KHz)额定功率下,输出值为-40dB时XLS 202: <0.3%
Legendary Crown quality at an easy price.
330W/ch @ 2 Ω, 300W/ch @ 4 Ω, 200W/ch @ 8 Ω, 660W bridged mono @ 4 Ω, 600W bridged mono @ 8 Ω. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.
Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and XLR inputs and Speakon or binding post outputs; all in a rugged steel chassis designed to handle serious road use.
Crown XLS 202D Power Amplifier Specifications:
Performance
Sensitivity (volts RMS) for full rated power at
4 Ω: 1.25V
Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, —0.8 dB
Signal-to-Noise Ratio (20Hz-20kHz)
A-weighted, below rated power: > 98dB
No weighting, below rated power: > 93dB
Total Harmonic Distortion (THD): < 0.5%
Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1) from full rated output
to —40dB: < 0.3%
Damping Factor (8 Ω) 10Hz to 400Hz: >200
Crosstalk (below rated power): at 1 kHz: —76 dB - at 20 kHz: —58 dB
Input Impedance (nominal): 20 kilΩ balanced, 10 kilΩ unbalanced
Load Impedance: Rated for 4 to 8 Ω per channel in Stereo, 8 Ω in Bridge Mono
AC Line Voltage and Frequency Configurations: Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC Mode Switch
Backpanel switch selects Dual or Bridge-Mono mode
Indicators
Signal Presence Indicators: Two green LEDs
Crown XLS 202D Power Amplifier Features:
Features sophisticated protection circuitry
5-way fault indicator
Red peak clip LED on each channel
Green signal-present LED that flashes when the level is extremely low
Detented level controls
Mode select switch for stereo or bridged
3-speed fan
XLR inputs; touch-proof binding post and Speakon outputs
Rugged steel chassis designed to handle serious road use.
3-year no-fault warranty
Only a click or two stands between you and torrents of clean Crown power. Order yours today!
| | |
|
|