美国皇冠CROWN:XLS-5000 专业音频功率放大器_功放,舞台功放,音频功率放大器尽在香港百利恒国际有限公司

产品类别：功放

产品名称：美国皇冠CROWN:XLS-5000 专业音频功率放大器

产品价格：面议
关键词：功放,舞台功放,音频功率放大器
产品说明：香港百利恒国际有限公司提供美国皇冠CROWN:XLS-5000 专业音频功率放大器产品信息,包括美国皇冠CROWN:XLS-5000 专业音频功率放大器产品详细介绍,美国皇冠CROWN:XLS-5000 专业音频功率放大器产品参数，3D图库等信息，显示的美国皇冠CROWN:XLS-5000 专业音频功率放大器图仅为参考,购买请以美国皇冠CROWN:XLS-5000 专业音频功率放大器实物为准.

美国皇冠CROWN:XLS-5000 专业音频功率放大器技术参数

皇冠CROWN XLS-5000 音频功率放大器

XLS 5000D
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification.

XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements - reliably and within budget. Every XLR Series amplifier is backed by Crown's unequaled three-year, no-fault, fully transferable warranty that covers everything.

With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series.

Features
Reliable design incorporates many popular features
Housed in a rugged, all-steel 3U chassis
Efficient forced-air fans prevent excessive thermal buildup
Electronically balanced XLR inputs; touch-proof binding post and Speakon outputs
Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
Three-year, no-fault, fully transferable warranty completely protects yourinvestment and guarantees its specifications
Output Power (1kHz continuous average power with 0.1% THD)

2 ohm stereo (per channel): 2,500W (with 1% THD)
4 ohm stereo (per channel): 1,800W
8 ohm stereo (per channel): 1,100W
8 ohm bridge mono: 3,600W
4 ohm bridge mono: 5,000W (with 1% THD)
Performance

Sensitivity (for full rated power at 4 ohms): 1.25 Vrms.
Frequency Response (at 1 watt, 22 Hz to 20 kHz): +0 dB, –1 dB.
Signal-to-Noise Ratio (20 Hz to 20 kHz, inputs terminated): A-weighted, below rated power: > 100 dB. No weighting, below rated power: > 95 dB.
Total Harmonic Distortion (THD): < 0.5%.
Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to –40 dB: < 0.3%.
Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
Crosstalk (below rated power): at 1 kHz: –75 dB. at 20 kHz: –59 dB.
Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
Load Impedance: 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
AC Line Voltage and Frequency Confi gurations Available (±10%): 120 VAC 60Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC.
Controls

Level: Two front-panel rotary level controls, one for each channel.
Power: Front-panel switch; on when in the IN position.
Circuit Breaker: Back-panel breaker provides overload protection.
Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode.
Indicators

Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel’s input signal exceeds –40 dBu.
Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven.
Power Indicator: Blue LED indicates amplifier has been turned on and AC power is available.
Fault Indicator: Two red LEDs, one for each channel, illuminate whenamplifier is in protect mode. Also illuminates briefl y during normal power-upwhen amplifier is first switched on.
Input/Output

Input Connectors: One per channel; back-panel three-pin female XLR input connectors.
Output Connectors: Two 4-Pole Speakon? Output Connectors accept 2-pole or4-pole Speakon? connectors. The top Speakon connector is wired for bothchannels so it can be used for bridge-mono wiring or for stereo wiring of twospeakers to a single Speakon connector.
One pair of back-panel bindingposts per channel; accepts banana plugs or bare wire. (European models do notaccept banana plugs.)
Protection

XLS Series amplifiers provide extensive protection and diagnosticcapabilities, including output current limiting, DC protection, circuitbreaker, and thermal protection.
Construction

Ventilation: Flow-through ventilation from front to back.
Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
Air Volume Requirements (per minute per unit): 80.15 ft3 (2.27 m3).
Dimensions (W x H x D): 19" x 5.25" x 15.5"
Weight : Net - 62.0 lbs (27.7 kg), Shipping - 74.0 lbs (33.6kg)